CO2/AIR AND NITROGEN/
           CO2 BLEND SYSTEMS
Regulate CO2 pressures - maintain proper carbonation.
Blenders prevent foamy beer under high pressures.
Oil less, continuous duty air compressor for quiet
operation.

                                                      CO2/AIR BLEND SYSTEMS

Dual Gauge Primary CO2 Regulator	Secondary CO2 Regulator
Model 106 CO2/air blender	Model 103 CO2/air blender

Proper pressures on CO2 regulators are set at installation to maintain carbonation at the level  to which it was brewed.  CO2/air blenders are one of the methods used when extreme pressures are required as when "pushing" the beer at an elevation or a great distance.  This method uses compressed air and CO2.  This eliminates the need to purchase additional gasses and is less costly to operate, however, exposure to air may cause contamination of the beer especially in kitchen areas where there is exposure to yeast and cooking odors.

                                    McDantim Nitrogen Gas Blend System

Single Blend Trumix 100	Dual Blend Trumix 200

The McDantim Gas Blending Panel comes with either one or two blends and standard or high flow models.  The panel is a small wall-mounted unit that is easy to install and requires no electricity, on-going maintenance or adjustment.  It can be used with any sources of clean Nitrogen and CO2 including high pressure cylinders, bulk tanks or separators.  They come preset to any CO2/Nitrogen blend you desire within the range of 20% through 80% CO2. 

Note:  To properly serve nitrogenated beer such as Guinness or Boddingtons mixed gas must be used.

Home    Products    Dispensing Towers    Novelty Dispensers    Refrigeration & Lines   

@ 2002 Polar Beer Systems, Inc.  All Rights Reserved
Site designed by:  SK Blais